Dalsan 25 Gauge Drywall Stud
- Dalsan Studs are profiles that are used in indoor drywall systems which provide high strength, high screw retaining, easy screwing and installation.
- Dalsan Studs are non-structural steels that used in interior drywall systems.
- Varying web depths and 1.25 in. flange with dimensions, 33 ksi yield stress.
- Pre-punched holes allow for ease of use
- Dalsan Studs are manufactured from corrosion- resistant, G40 galvanized steels.
- Certified by Intertek to comply with ASTM C645
-Standard sizes are:
1-5/8”
2-1/2”
3-5/8”
-Standard lengths are 10 feet and 9.33 feet
-Currently the standard product is lightly embossed on the sides. Fully embossed is also available.
- Dalsan Studs are profiles that are used in indoor drywall systems which provide high strength, high screw retaining, easy screwing and installation.
- Dalsan Studs are non-structural steels that used in interior drywall systems.
- Varying web depths and 1.25 in. flange with dimensions, 33 ksi yield stress.
- Pre-punched holes allow for ease of use
- Dalsan Studs are manufactured from corrosion- resistant, G40 galvanized steels.
- Certified by Intertek to comply with ASTM C645
-Standard sizes are:
1-5/8”
2-1/2”
3-5/8”
-Standard lengths are 10 feet and 9.33 feet
-Currently the standard product is lightly embossed on the sides. Fully embossed is also available.
- Dalsan Studs are profiles that are used in indoor drywall systems which provide high strength, high screw retaining, easy screwing and installation.
- Dalsan Studs are non-structural steels that used in interior drywall systems.
- Varying web depths and 1.25 in. flange with dimensions, 33 ksi yield stress.
- Pre-punched holes allow for ease of use
- Dalsan Studs are manufactured from corrosion- resistant, G40 galvanized steels.
- Certified by Intertek to comply with ASTM C645
-Standard sizes are:
1-5/8”
2-1/2”
3-5/8”
-Standard lengths are 10 feet and 9.33 feet
-Currently the standard product is lightly embossed on the sides. Fully embossed is also available.
